Singer / DeSigner

The base is a 1920 Singer sewing machine table. The table legs and the steel leg drive are original, I redesigned everything else. The table is made of oak, so the new elements are also made of oak. An aluminum drawer extends 200 mm from the sewing machine, which comes out of the top of the original Singer table, into which I installed the entire liquid cooling system. The motherboard, the GPU and the tank are on the top, the radiator and the power supply are on the bottom. The movement is ensured by a linear actuator, which I connected to a garage door opener controller, it works with a radio remote control. I built a bad Asus notebook display on the top sheet, which works as part of the system. This entire top unit can be removed in one go. Asus hardware, Alphacool clear liquid system and AITC Global M.2 and memory kit from new support. The GPU cooling has a unique design, I designed a 2-point GPU connection for it, in which the 2x8 power cable is hidden. The machine's wires are hidden at the bottom. The garage door controller and the Wi-Fi antenna are also hidden here. I also installed a mini Bluetooth sound amplifier in the lower part. I converted the two Singer drawers into speakers. The radiator is hidden between perforated steel plates and powder coated. Some distinguishing elements are made of brass and plexiglass. A Sanyo bicycle dynamo is activated to drive the blade, which supplies the lamp with electricity.

AMD CPU
ASUS (AMD) Graphics
AlphaCool Cooling
Water-cooled

M/BASUS - ROG Crosshair VI Extreme CPUAMD Ryzen 5 (5600X) GPUASUS - Rog Strix RX6700XT 12GB RAMAITC Kingsman DDR4 (3200MHz) 32 GB PSUASUS Rog STRIX 850G STORAGEAITC-KM600 128GB COOLINGAlphacool Aurora D5 Acetal/GlassAlphacool - Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/ROG StrixAlphacool - EispumpeVPP755 Single ReservoirAlphacool - Ice Cream Cup Aurora D5 acetal/glass-150mmAlphacool 13/10 tube

600+

ASUS ALPHACOOL GEILAITC KingsmanHRP Europe