Works - DesignedByGP

Skip to content

Homepage
Works
Contact

Menu

Homepage
Works
Contact

Singer / DESIGNER
2023

The base is a 1920 Singer sewing machine table. The table legs and the steel leg drive are original, I redesigned everything else. The table is made of oak, so the new elements are also made of oak. Hours in the making: 600+

Baby Project
2020

CaseMod 2nd place

The stock Cooler Master H100 "Baby" case is the base of the build but since the dimensions of the GPU outgrown the case I have to mod it too by adding 100mm to it. I build the 280 radiator to the lower wooden frame and replace one of the fans with the PSU which fan will cool the radiator too. I place the H100 case on top of this. I combine these two parts with 2 special clamps.

Wood Tower
2019

CaseCon 3rd place

Over 1 meter tall beautiful mahagoni tower, with custom liquid cooling, Aura Sync lighting and minimal/hidden cable management. The basic idea was to create a build that fits perfectly in an elegant, modern living room and can be a part of your home. Hours in the making: 800+

Aura Master
2017

Asus Aura RGB themed liquid cooled build based on a Cooler Master Mastercase Maker 5, hence the name, Aura Master. Unique design elements: front panel bubble wall, RGB lit PSU, double-layer glass side panel.

Toilet Ultimate Force
2016

This build resemles a modern toilet, patent pending. 1:1 scale, and of course liquid cooled. The steel frame is covered with perforated and polished aluminum panels, this is the base and contains the radiator. The bowl itself is RGB lit, 52 layers of polycarbonate and pressed wood. Inside it is the motherboard and the PSU. Hours in the making: 700+

A.C.M.E.A.
2015

Full rebuild of the ’Spare Tyre’. The build is now liquid cooled, the radiators and the remote starter is built in the base, and it features two Asus 970GTX Strix in SLI. The wheel is mounted to the base with stranded steel wire. Weighs about 45kg. Hours in the making: 600+

MB Project 2.0
2013-2014

CaseCon Audience Award 2nd place

PC, coffee table, wine holder. All this made of a V8 Mercedes Benz engine. The components are cooled without any radiator, with the help of the engine’s cooling zones. The cooling circuit volume is 3.5 liters. The top is a 700×700 folding glass with Mercedes logo engraving. Weighs 72kg. Hours in the making: 1000+

Spare Tyre
2008

This case is made of two 18″ aluminum rims welded together, with a 285/30R18 Michelin rubber mounted. The tyre is inflated with air on the 12,5” wide dial. There are 2 glass shelves inside, holding the components. This system features air cooling. Weighs about 40kg. Hours in the making: 600+

Cool Elegance
2006

CaseCon Audience Award 2nd place

My first casecon. The base is a 23” Antera aluminum rim for Range Rover. The components are mounted on a 10mm thick, 620mm diameter glass. The ODD is in the middle and opens with the wheel cap. The interior lighting came to life with blue UV neon and blue sleeved cables. Weighs about 40kg. Hours in the making: 500+ DCMM 2^nd place by audience.

Blue Dream
2003

My first modded PC, an Antec Lanboy, full aluminum. I mostly did optical modifications, I placed a mirror on the bottom, the special lighting is created with UV neons and UV reagent sleeved cables. Hours in the making: ~ 40

made with by

designedbyGP 2017—2023

Facebook Twitter Youtube Instagram Envelope